This folder contains the files required to create a disk and run CP/68 on a SWTPC 6800
computer with the MF-68 disk system (or equivalent). Use PC2FLOP in the "Disk Image Transfer"
folder to format and write a bootable disk directly on your SWTPC 6800. See the ReadMe file
in the "Disk Image Transfer" folder for more information.

Once the disk is created, use the SWTBUG "D" command to boot the disk (disk in drive 0).
CP/68 requires at least 16K-32K of RAM. The linker for the assembler requires about 4K
of RAM starting at $B000.

The "asm" folder contains the files I used to create the bootable disk image.

Thanks to Roberto Sancho Villa for his work resurrecting CP/68 for the 6800 community.