CP/M 1.4 for the iCOM 3712 dual disk drive with the Altair 8800

The file "CPM14-3712-48K.dsk" is a bootable version of CP/M 1.4 for the
iCOM 3712 running with an Altair 8800 (specifically, an 88-2SIO serial
port as the operator's console). Create this disk first and use it
to then create and look at the other disks in this folder.

Use PC2FLOP in the "Disk Image Transfer" folder to write a disk image
to a pre-formatted 8" single-sided floppy disk. Once the disk is 
written, you may want to put PC2FLOP.COM on the disk to make it
easier to create other disks. Use PCGET to load PC2FLOP.COM onto the
disk.

Run MOVCPM to size for a different amount of RAM. Must use original
syntax, e.g., "MOVCPM 48 *" to size for 48K or "MOVCPM * *" to let
CP/M size the RAM. Then run SYSGEN to write the image already in RAM
to the boot disk.