BINARY FILE LOADER FOR POLY-88xx COMPUTERS

Loads a ready to execute binary file into RAM at 3200h
through the printer serial port.

Press CTRL-Z to enter the front panel mode and type the
bytes of this program in at 8000h:

  L8000<CR> then type in each byte in hex with a space
  between each byte. The addresses shown below are for
  reference only - do not type in the address values.


   8000: CD AD 02 1F AA 40 4E 00
   8008: F3 3E 26 D3 01 21 00 32
   8010: DB 01 E6 02 CA 10 80 DB
   8018: 00 77 23 C3 10 80

Execute the program by jumping to it:

   SPJ8000<CR>G

Send the file in 8 bit binary mode from the PC. After the 
file has been sent, reset the computer and re-enter front
panel mode by pressing CTRL-Z. Jump to the loaded program
at 3200h:
   
   SPJ3200<CR>G